Tarang
![]() |
![]() |
![]() |
|
Platform |
Tarang-F4 |
Tarang-F20 |
Tarang-F30 |
|
Power |
|
||
|
Supply Voltage |
3.0 to 3.3V |
3.0 to 3.3V |
4.8 to 5.4 V |
|
Transmit Current |
45mA |
215mA |
450mA |
|
Idle/Receive Current |
50mA |
50mA |
60mA |
|
Power-down Current |
<10 ľA |
<10 ľA |
<50 ľA |
|
General |
|
||
|
Rating Frequency |
ISM 2.4 GHz |
ISM 2.4 GHz |
ISM 2.4 GHz |
|
Indoor/urban range |
Up to 30 mt |
Up to 100 mt |
Upto 300mt with 2db antennas |
|
Outdoor RF line-of-sight range |
Up to 1 Km |
Up to 5 Km |
Upto 50km with appropriate high gain antennas and elevation |
|
Transmit power output |
1mW (+0 dBm) |
60 mW (+18 dBm) |
1W(30 dBm) |
|
RF data rate |
250 Kbps |
250 Kbps |
250 Kbps |
|
Receiver sensitivity |
-92 dBm |
-100 dBm |
-107 dBm |
|
Serial Interface data rate |
Upto 115200 configurable |
Upto 115200 configurable |
Upto 115200 configurable |
|
Operating temperature |
-40 to 85 degree C |
-40 to 85 degree C |
-40 to 85 degree C |
|
Antenna Options |
Chip
Antenna |
Chip
Antenna |
--- |
|
Antenna Connector |
MMCX |
MMCX |
MMCX |
|
Network |
|
||
|
Supported network topologies |
Point-to-point, point-to-multipoint & peer-to-peer |
Point-to-point, point-to-multipoint & peer-to-peer |
Point-to-point, point-to-multipoint & peer-to-peer |
|
Number of channels |
16 direct sequence channels |
16 direct sequence channels |
16 direct sequence channels |
|
Addressing options |
PAN ID, Channel and addresses |
PAN ID, Channel and addresses |
PAN ID, Channel and addresses |
|
Mechanical |
|
||
|
Dimensions |
36.2mm x 25.6mm. |
42.0mm x 25.6mm. |
61.0mm x 42.5mm. |
|
Interface Connector |
2x10 pin berg stick, 2.00mm pitch. |
2x10 pin berg stick, 2.00mm pitch. |
2x10 pin berg stick, 2.54mm pitch. |
Features and Benefits:
Point to point, point to multi point and peer-to-peer topologies are possible.
Direct sequence spread spectrum technology.
Each direct sequence channel has 64K unique network addresses
Transmit Power: 0 dBm, 18 dBm and 30 dBm .
RF data rate: 250 kbps.
Includes receive band-pass filter in Tarang-F30
Acknowledgement mode communication with retries
Power saving modes.
Source/destination addressing.
Unicast and broadcast communication.
Analog to digital conversion and digital I/O line support.
Default configuration for ready to use.
© 2005 - 2007 Melange Systems Pvt. Ltd . All rights reserved.